A burst pipe in the home can cause some serious damage. Keep on top of things with our handy hints below.
A burst pipe is classed as a water emergency – it can cause serious damage to your home’s structure and electrical wiring. It’s vital to take action as soon as you discover a burst pipe.
Dealing with a burst pipe
If you’ve got a burst pipe problem, follow these directions to get things back to normal fast:
1. Turn off the water supply
Turn off the main stopcock. You should find this under the kitchen sink or where the service pipe enters your home.
2. Drain the system
Then drain the system by turning on all your cold taps and flushing your toilets.
3. If it’s a heating pipe that’s burst – Turn off water heating systems
Switch off the central heating, immersion heater and any other water heating systems. If the central heating uses solid fuel, let this die out. Once your water heating has shut down, turn on the hot taps to help drain the system.
4. Turn off the electrics
If water from the burst pipe is leaking near your electrics or electrical appliances, switch off the mains immediately. If the mains switch is wet, don’t touch it or you could risk electrocution! Call a qualified electrician immediately.
5. Be safe
If you notice the leak quickly you can catch dripping water in buckets. However, if water has been leaking through for some time and the ceilings are bulging, rooms may not be safe to enter. If the ceiling is bulging and you’re confident that there is no danger, punch a small hole in it with a screwdriver to let the water drain.
6. Fix the problem
If you’re at all unsure about fixing a burst pipe by yourself, call in a professional plumber to repair the problem. And if you have a home emergency policy that covers you for burst pipes, get in touch with your insurer as soon as possible.
If you’re an expert DIY-er you may want to attempt the job yourself. If the burst pipe is leaking from a screw fitting, see if you can tighten it. If the pipe is split or pierced with a nail then it will need to be repaired. Buy a DIY kit which replaces the broken part with a piece of new pipe. Full instructions will be included.
Prevent your pipes from bursting again
Low temperatures results in water in your pipes freezing which can cause your pipes to burst. You should be able to prevent future burst pipes by taking the following steps to stop your pipes from freezing again.
- Insulate your loft
- Insulate your water supply pipes
- Shut off the water supply pipe to your house and drain the pipes if you go away for a few days
- Stay on top of plumbing maintenance problems like dripping taps as these can freeze if the temperature drops
We try to make the advice on our website (www.HomeServe.com) as useful and reliable as possible. However, the purpose of this advice section of the website is to provide homeowners and private landlords with general guidance and useful tips only. It doesn’t necessarily deal with every important topic or cover every aspect of the topics with which it deals and might not be relevant or appropriate in all circumstances. It is not designed to provide professional advice or financial advice and should not be relied on as such. Click here to read the disclaimer in full.